PRODUCT

PENNY PANEL®

THICKNESS
50mm+100mm+125mm by special order
75 mm available no special order needed

FIBRE CEMENT BOARD THICKNESS
5mm
6 mm (by special order )

FIBRE PROPERTIES (Fire resistance section )

50 mm 60 minutes
75mm panel 2 hours
100mm 180 minutes

In terms of Building Code of Australia (AS1530 Part 1) PENNY PANEL® is deemed to be non-combustible.

EPS BEADS
Combustion of EPS in the panel core does not pose a toxicity problem. The CSIRO Division of Building Research states that “for foamed polystyrene the potential toxic hazard appears to be no greater than that for wood”.

INSTALLATION
PENNY PANEL® are erected using light gauge steel framing at wall base and head. A variety of installation options are available incorporating channel, angle or totally concealed framing systems. PENNY PANEL® slip together using a tongue and groove jointing system and may be flush set or butt jointed according to project requirements.

PERFORMANCE CHARACTERISTICS
It has no toxic potential performance and characteristics:

PENNY PANEL® is suitable for the application of a wide variety of surface finishes, including paints and aggregates.

The fibre cement facings are immune to permanent water damage making PENNY PANEL® suitable for use in wet area applications.

NO PRODUCT DESCRIPTION SIZE LOADING CAPACITY
40″ (pcs) Tones
PENNY PANEL®
1. Plain (without conduit) 50mm x 600mm x 3000mm 380 26,6
2. Plain (without conduit) 75mm x 600mm x 3000mm 290 26,1
3. Plain (without conduit) 100mm x 600mm x 3000mm 205 26,7

PENNY PANEL®
1. Single conduit 50mm x 600mm x 3000mm 380 26,6
2. Single conduit 75mm x 600mm x 3000mm 290 26,1
3. Single conduit 100mm x 600mm x 3000mm 205 26,7

PENNY PANEL®
1. L type 50mm x 200mm x 3000mm 504 23,5
2. L type 75mm x 200mm x 3000mm 341 20,5
3. L type 100mm x 200mm x 3000mm 409 26,6

PENNY PANEL®
1. T type 50mm x 200mm x 3000mm 510 20,8
2. T type 75mm x 200mm x 3000mm 441 21,2
3. T type 100mm x 200mm x 3000mm 410 26,7

PENNY PANEL®
1. Penny Blocks 40mm*20mm*20m 510 20,8